Bloomfield SDS-5SB Provozní pokyny stáhnout pdf (Strana 10)

IMPORTANT:

DO NOT remove the satellite

from the docking station by the

sight glass. Always manipulate

and carry the satellite by the

handles at the top of the

GETTING STARTED

Check the docking station:

Check that the brewer is clean and the drip tray (if used)

is empty.

Check that the docking station is plugged into an appropriate

receptacle.

DAILY START-UP

Install satellites in any or all of the five positions of the docking

station. When the satellite is properly installed, the connector of

the satellite will be fully seated in the connector of the docking

station, and the indicator light for that docking position will glow.

OPERATING INSTRUCTIONS

HANDLES

CONNECTOR

Fig. 3 Satellite Connector

Fig. 2 Satellite Handles

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Bloomfield SDS-5SB Provozní pokyny Strana 10